Functions - Duux Slim 1000 Manuel D'utilisation

3. Functions

1
2
3
4
5
6
7
Control panel
Increase temperature
1
Decrease temperature
2
Temperature setting
3
Change heating program
4
Timer
5
6 Power button
7 Operating indicator
8
8 9
10 11
12 13
Remote control
8 Power button
9 Timer
Temperature setting
10
Change heating program
11
12 Increase temperature
13 Decrease temperature
Functions
Increase the value of temperature or timer
Decrease the value of temperature or timer
Change heating program between HOME,
OFFICE, or CABIN
Press this button to enter the temperature
setting
Press this button to activate the timer mode
Press this button to switch the unit on or off
Display layout
Combination button and
functions
Child lock - Press the button for 5 seconds
to lock all program functions. The lock
symbol lights on display with light on. Press
for 5 seconds again to deactivate the child
lock.
Light intensity - Press the button for
5 seconds to adjust the intensity of the
standby light by pressing the '+ or –' button.
In total 3 intensities can be selected.
Factory reset - Press the button for 20
seconds to return the product back to its
factory setting.
Using the device
First switch the red mechanical button "POWER"
to ON by pressing the button on the right side of
heater. Hereafter press the ON/OFF switch to start
to turn the product on or off.
Note: This unit is for floor use or wall mounting
use only.
Note: Current time (hour/minutes) need to be
set before entering into one of the heating modes
(Home/Office/Cabin) by pressing button. The
current date and time can be set according to below
steps:
9