Bosch PRIO Lithium-Ion Notice Originale page 21

Operation
Starting Operation
Switching On and Off
Press the On/Off switch 1 to start the machine.
To switch off the machine, press the On/Off
switch 1 again.
Battery Charge-control Indication
The battery charge-control indication
2 indicates the charge condition of
the battery during operation and con-
sists of 2 green LEDs and a red LED.
LED
Continuous lighting, green-green-
red
Continuous lighting, green-red
Flashing light, red (flash frequency
increases with dropping capacity)
Working Advice
Wait until the machine has come to a stand-
still before placing it down.
The removal capacity during sanding is mainly
determined by the selection of the sanding
sheet.
Only flawless sanding sheets achieve good
sanding capacity and extend the service life of
the machine.
Pay attention to apply uniform sanding pres-
sure; this increases the working life of the sand-
ing sheets.
Intensifiying the sanding pressure does not lead
to an increase of the sanding capacity, but to in-
creased wear of the machine and the sanding
sheet.
For precise on-the-spot sanding of edges, cor-
ners and hard to reach areas, it is also possible
to work only with the tip or an edge of the sand-
ing plate.
A sanding sheet that has been used for metal
should not be used for other materials.
Use only original Bosch sanding accessories.
Bosch Power Tools
Maintenance and Service
Maintenance and Cleaning
For safe and proper working, always keep
the machine and ventilation slots clean.
Before any work on the machine (e. g. main-
tenance, changing the tool, etc.) as well as
during its transport and storage, lock the
On/Off switch in the off position. There is
danger of injury when the On/Off switch is
unintentionally actuated.
When the battery is no longer operative, please
refer to an authorised after-sales service agent
for Bosch power tools.
Capacity If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
≥ 50%
centre for Bosch power tools.
25—50%
In all correspondence and spare parts order,
please always include the 10-digit article
≤ 25%
number given on the type plate of the machine.
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: SPT-Technical.de@de.bosch.com
English | 21
1 609 929 S57 | (8.7.09)