Bosch PRIO Lithium-Ion Notice Originale page 17

Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Before any work on the machine (e. g. main-
tenance, changing the tool, etc.) as well as
during its transport and storage, lock the
On/Off switch in the off position. There is
danger of injury when the On/Off switch is
unintentionally actuated.
Protect the power tool against heat,
e. g., also against continuous sun irra-
diation and fire. There is danger of ex-
plosion.
In case of damage and improper use of the
battery, vapours may be emitted. Provide
for fresh air and seek medical help in case
of complaints. The vapours can irritate the
respiratory system.
When the battery is defective, liquid can es-
cape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
Safety Warnings for battery chargers
Keep the battery charger away from
rain or moisture. Penetration of water
in the battery charger increases the
risk of an electric shock.
Do not charge other batteries. The battery
charger is suitable only for charging Bosch
lithium ion batteries within the listed voltage
range. Otherwise there is danger of fire and
explosion.
Keep the battery charger clean. Contamina-
tion can lead to danger of an electric shock.
Before each use, check the battery charger,
cable and plug. If damage is detected, do
not use the battery charger. Never open the
battery charger yourself. Have repairs per-
formed only by a qualified technician and
only using original spare parts. Damaged
battery chargers, cables and plugs increase
the risk of an electric shock.
Bosch Power Tools
Do not operate the battery charger on easi-
ly inflammable surfaces (e. g., paper, tex-
tiles, etc.) or surroundings. The heating of
the battery charger during the charging proc-
ess can pose a fire hazard.
Children should be supervised to ensure
that they do not play with the battery charg-
er.
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The machine is intended for dry sanding and
polishing of wood, filler and coated surfaces. It
is especially suitable for profiles, corners or
hard to reach locations.
Use the battery charger only when you fully un-
derstand and can perform all functions without
limitation, or have received appropriate instruc-
tions.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 On/Off switch
2 Battery charge-control indicator
3 Sanding sheet*
4 Sanding plate
English | 17
1 609 929 S57 | (8.7.09)