Titanium 2502XCD Guide D'utilisation page 23

interlock switch that is built into the bask frame, the machine
will not operate.
4. When the paper is shredding, the LED light(
blinking, that means the paper is shredding.
5. When the LED light is (
the right position.
6. If the shredder is overloading, it will automatically shut down
and the red LED light( ) will illuminate until it is safe to resume
shredding again. Please set the switch to "REV" to back the
paper out of the unit, then clear redundant paper then press
again the "FWD" switch, the machine will work normally.
7. If the shredder is overheated , it will automatically shut down
and the Red LED light( ) will illuminate until it is safe to resume
shredding again.
8. The red LED light( ) will illuminate when the basket is full of
paper, and the basket will show blue light.
9. Do not shred labels or paper with labels affixed to them.
By doing so will void your warranty. Also this will gum the
cutting blades and cause the shredder to malfunction.
8. Technical data
Cutting style:
Shred size
Shred capacity:
Waste bin for paper
Entry width:
Net Weight:
Dimensions:
Input:
), it means the basket is open or not in
fragment
4x38mm
25sheets (A4) - 1 credit card
30lt
220mm
19,5Kg
360x286x602mm
230V AC/50Hz
2502XCD
)will keep
23