Ayce TRUE BALCK 1.0 Manuel D'utilisation page 130

5. When you complete the setting of Minute, Press
[ ALARM ] key or leave the unit for 60 seconds to
return to normal mode.
Note:
The alarm function will turn on automatically once
you set the alarm time.
USING ALARM AND SNOOZE FUNCTION
Set the desired alarm time as described in the
above section. Or
1. Press the [ ALARM ] button once to turn onalarm 1" ".
2. Press the [ ALARM ] button again to turn onalarm 2" "
3. Press the [ ALARM ] button again to turn on alarm
" "and alarm 2"
4. Press the [ ALARM ] button again to turn off alarm
" "and alarm 2"
When clock reach the alarm time, alarm sound
will start. Where it can be stopped by following
operation:
a) Auto-stop after 2 minutes alarming if without any
operation and the alarm will activate again in the
next day.
b) By pressing [ ALARM / SNOOZE ] key to enter snooze
that the alarm will sound again after 5 minutes.
".
".
GB