Ayce TRUE BALCK 1.0 Manuel D'utilisation page 122

WIRELESS THERMO-HYGRO SENSOR
WITH RCC RECEIVE FUNCTION
1. Transmission status LED
2. [ RCC ] receive key
Press for RCC receiving.
3. [ RESET ] key
GETTING STARTED
WIRELESS SENSOR
1. Remove the battery door.
- - - -
2. Assign the channel no. (CH 1~8) for the wireless
sensor by using channel slide switch.
3. Insert 2 x AA size batteries into the battery
compartment. Make sure you insert them the right
1
2
3
4. Wall mounting holder
5. [ CHANNEL ] slide switch
Assign the sensor to
Channel 1,2,3,4,5,6,7 or 8.
6. Battery compartment
4
5
6
GB