Taking Out Of Service And Disposal; Technical Specifications - ASO Safety Solutions ELMON inducti ve 74-312 Manuel D'utilisation

ELMON inducti ve 74-312
Inducti ve signal transmission system

9 Taking out of service and disposal

The products manufactured by ASO are intended solely for commercial use (B2B) At the end of use,
the products are to be disposed of according to all local, regional and nati onal regulati ons Products
can also be returned to ASO, which will then dispose of them properly
10 Technical specifi cati ons
Supply voltage
Mains voltage:
Low voltage:
Power consumpti on
Terminal resistance of the safety contact edges
nominal value
upper switching point
lower switching point
Nominal current DC
Nominal current AC
Mech life-ti me
Switching off delay (response ti me)
Switching on delay
protecti on
Housing
Dimensions (HxWxD)
Housing
Housing incl cable clamps
Protecti on class
Weight 460 g
Temperature range
Connecti on cable cross-secti on
single- or fi ne-stranded cable 0,75-1,5 mm
Certi fi cati ons
ELMON inducti ve 74-312 EN ISO 13849-1:2015 Category 3 PL d
Electronics
Electromechanics
Output unit (relay)
signal transmitt er
(Example SENTIR mat)
Safety device acc to DIN EN 12978
All voltages connected to the switching unit must be safely
isolated!
U 230 V AC 50/60 Hz
mains
U 24 V AC/DC ±10 %
E
P 3 VA
max
Stati onary Travelling
contact edge contact edge
R = 8,2 kΩ
nom
R > 12 kΩ
AO
R < 5 kΩ
AU
2 A 24 V DC
2 A 30 V AC
>10 actuati ons
6
Stati onary
contact edge
< 10 ms
500 ms (Power on 700 ms)
2A ti me lag (glass tube 5x20)
Polystyrene with transparent cover
80 x 120 x 55 mm
102 x 120 x 55 mm
IP65
-20°C to +55°C
2
MTTFD 81 years, DC 95 %, PFHD 6,62E-08 1/h MTTFD 81 years, DC 95 %, PFHD 6,62E-08 1/h
MTTFD 598 years, DC 99 %
MTTFD 380 years, DC 99%
(B10D 2000000, Nop 52560)
MTTFD 380 years, DC 90%
(B10D 2000000, Nop 52560)
= 8,2 kΩ
> 20 kΩ
< 2,5 kΩ
Travelling
contact edge
< 30 ms
EC type-examinati on no.:
44 205 13 031832
Test report no.:
3525 3024
21