Set The Clock (Manually); Set The Date - Seg CR 105K Instructions D'utilisation

•
When the radio is ON, press <ALARM1/Vol. +> and <ALARM2/Vol.
-> to adjust speaker volume
•
When the radio is ON, press <MEMORY REVIEW /A.M.S> to
preview those preset memory. Press and hold for 2 seconds to
activated the AMS (Automatic Memory Storage)
•
At every minute boundary, the real time clock is compared with
the alarm setting if it has been enabled. For details, please
refer to the section of 'When alarm is active'
3.2

Set the clock (manually)

•
Press <MODE SETTING > once when the unit stays in clock
display mode
•
The clock goes flashing the LCD with day-flag cleared
•
The second keeps counting up once per second
•
Press <UP> to advance the clock by 1 minute
•
Press <DOWN> to move the clock back by 1 minute
•
Press and hold <UP> or <DOWN> to set the clock in fast mode of
10 minutes per step
•
Press <MODE SETTING > once to set the date.
•
Press other key to start its corresponding function.
•
When no key has been pressed for 10 seconds, the current
setting is confirmed and it switches to auto-run mode
3.3

Set the date

•
Press <MODE SETTING> once in clock setting mode
•
The current date goes flashing in the format of dd.mm.yyyy in
the LCD
•
Press <UP> or <DOWN> to change the current setting by 1 day
_____________________________________________________________
-13- GB
● ●