Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
CONNECTIONS
Before connecting your installation, make sure all equipment is switched off. If you have any doubts
about connecting your installation, we recommend you to contact your authorized dealer.
Connection to a multi-channel audio-video amplifier
Use the SUBWOOFER output of the amplifier (RCA connectors) and connect it to one of the two
inputs (R or L) Line-IN (low level) or to the LFE on your subwoofer.
When connected to one of the line-IN inputs, the frequency cut-off will be adjusted directly on the
subwoofer (Crossover).
When connected to the subwoofers LFE input, the setting of the crossover frequencies should be
regulated in the dedicated menu on your AV amplifier (see the user manual of your device). When
connected, please turn the Crossover to the maximum.
A/V AMPLIFIER
S U B W O O F E R
OUT
20
Publicité
Table des Matières
