Publicité
Les langues disponibles
Les langues disponibles
Operation
You can use this mixer set either with the supplied stand
and bowl or use the hand mixer separately.
1. Place the mixer stand (11) on an even and heat resistant
surface
2. Press the release button of the mixer holder (12) and lift the
mixer unit holder (9) upward.
3. Remove the mixing bowl (13) and put the required ingredients
inside.
4. Reinsert the mixing bowl (13) into the mixer stand (11).
5. Press the release button of the mixer holder (12) and lower
the mixer unit holder (9) downwards.
6. Attach the assembled mixer (1) onto the mixer unit holder
(9) by placing the mixer front onto mixer unit holder (9).
Press the mixer downwards and make sure that the mixer
is properly secured onto the mixer unit holder (9).
7. After the beaters (6) resp. dough hooks (7) are lowered into
the ingredients, connect the plug (8) to a properly installed
wall socket.
8. Start the mixing process by turning the speed control switch
(3) to the right. You can choose from 5 speed settings (1 –
5) and Turbo (4) (see explanation underneath).
In case that ingredients are stuck, switch off the appliance
and use the scraper (14) to move them back to the middle
of the mixing bowl (13). Switch the appliance back on and
continue with the mixing process.
9. Once the mixing process is complete switch off (0-position)
your appliance and disconnect it from the mains.
- Press the release button of the mixer unit (10) and remove
it from the mixer unit holder (9).
- Remove the beaters (6) resp. dough hooks (7) by pushing
the eject button (2).
10. Press the release button of the mixer holder (12) and lift the
mixer unit holder (9) upward.
11. Remove the mixing bowl (13) from the mixer stand (11) and
remove its content.
20
Publicité
