König Electronic VID-TRANS20KN Mode D'emploi page 6

Close the battery compartment. Make sure the battery compartment cover is locked
securely.
Remark: never mix old batteries with new ones. Remove batteries from the monitor when it
won't be used for a period of time.
For AC current connect the 12V AC/DC adapter.
Turn on the ON/OFF switch. A is for only audio monitoring. A/V is for audio and picture. Adjust
brightness, contrast en volume to a desired level. If the picture is rolling, turn the V-hold knob
till the rolling stops.
The monitor will auto detect the receiving channels, and display them in sequence. When only
one channel switch is in the ON position, the monitor will display that channel continuously,
without regard to the position of the T switch. If more than one switch is turned on, the auto-
sequence function will alternately display those channels.
Remark: When none of the dipswitches are in the ON position, the monitor will automatically
set the receiving channel to channel 1.
5