Publicité
Les langues disponibles
Les langues disponibles
TFA_No. 38.2029_Anleit_09_21
Stop watch
• Press the LAP/RESET button to select the minutes, hours,
day, month and day of the week and set them with the
START/STOP button.
• Please note that during the setting of the hours at first, A,
P and then H appears.
• In the 12 hour system, A (in the morning) or P (in the
afternoon) appears on the display.
• With regard to the 12 hour system, A (in the morning) or
P (in the afternoon) appears on the display.
• In the 24 hour system, H appears on the display.
• Press the MODE button to confirm the settings.
• The display shows the current time and the symbol of the
weekday is highlighted.
• Press the START/STOP button while in normal mode to
switch between time and date.
5.2 Alarms
Setting of the alarm
• Press the MODE button twice in normal mode to enter the
setting mode for the alarm time.
• The symbol of the hour and the day-of-the-week are flash-
ing.
• Press the START/STOP button to set the hours.
• The alarm symbol appears on the display.
• The alarm is activated.
• Press the LAP/RESET button.
• The minute digits are flashing.
• Press the START/STOP button to adjust the minutes.
• Press the MODE button to confirm the settings.
• The current time and the alarm symbol appear on the dis-
play and the symbol of the day-of-the-week is highlighted.
• When the alarm time is reached, the alarm will ring.
• If the alarm is not stopped with the LAP/RESET button, the
alarm sound will automatically turn off after a few seconds
and will be reactivated at the same time.
• Press the START/STOP button and the snooze function
will be activated. The alarm sound will be reactivated after
5 minutes.
• Press the LAP/RESET and the START/STOP buttons at the
same time to activate/turn off the alarm function.
• The alarm symbol appears/disappears on the display.
12
13.09.2021
14:25 Uhr
Stop watch
• Press the LAP/RESET button in normal mode to change
between the time and the alarm time.
5.3 Setting of the hourly chime
• Press and hold the LAP/RESET button in normal mode.
• The adjusted alarm time appears on the display.
• Press the MODE button at the same time to activate the
hourly chime.
• Black bars appear under the symbols of the day-of-the-
week.
• The hourly chime is now activated.
• Press and hold the LAP/RESET button and press the
MODE button at the same time to deactivate the function.
• The black bars disappear.
5.4 Stop watch function
• Press the MODE button in normal mode to enter the stop
watch mode. In the stop watch mode the black bars are
flashing.
• With the START/STOP button you can start and stop the
countdown.
• Press the LAP/RESET button to clear the countdown.
• The total countdown will be 29 minutes and 59,99 seconds
and the indication of the counted time will be in 100th of a
second interval.
• After the first 30 minutes the clock will automatically
switch to one second increment.
• After that, the smallest unit will no longer be 100th of sec-
onds but only full seconds.
5.4.1 Split time measurement
• Press the START/STOP button to activate the stopwatch.
Press the LAP/RESET button and the elapsed time will be
displayed. The stop watch is running in the background
and by pressing the LAP/RESET button again, the current
time appears on the display. With this function, it is possi-
ble to measure any number of split times from the start.
Seite 7
13
Publicité
