Pc Connection And External Memory Usage; Firmware Reinstallation - ENERGY SISTEM Energy 3D HD Manuel De L'utilisateur

PC CONNECTION AND EXTERNAL MEMORY USAGE

≥
In order to enjoy the multimedia capabilities of your Energy™ 3D HD Media Player, you have to first copy your favourite files
from your PC to its internal memory, or use a microSDHC memory expansion card (up to 32GB), or just connect an external
storage device with the included USB HOST cable (mini USB port).
Note: Turn off your Energy™ 3D HD Media Player each time you insert/extract your microSDHC card or external storage
device to avoid accidental data losses.
To transfer content to the internal memory of your Energy™ 3D HD Media Player, connect it to the computer using the USB
2.0 cable included. Select the "SETTINGS" icon from the main menu, press the "Common" option and select "Connect to PC"
with the PLAY button. Your device will be detected automatically without installing any driver. Once detected, you can read/
write to the device's memory just as if you where using a regular disk drive.
Important: To avoid any data loss, always perform a safe USB device extraction before disconnecting the USB cable from
the device of the PC. In Windows, for example, you can find the safe extraction icon in the task bar, next to the system clock.

FIRMWARE REINSTALLATION

≥
Your Energy™ 3D HD Media Player has installed an operating system, usually called firmware that sometimes needs to be
reinstalled. It is an easy process, but has to be performed carefully, and only when it is really necessary.
Important: First of all, make a backup of the files inside your Energy™ 3D HD Media Player that you want to keep and
disconnect the device from your PC, since during the firmware reinstallation process the memory will be formatted and
erased. It is also is very important to make sure that your computer is virus-free and has no halt/lock problems. Lastly,
make sure your device is fully charged.
48