Battery Power - ENERGY SISTEM Energy 3D HD Manuel De L'utilisateur

BATTERY POWER

≥
Your Energy™ 3D HD Media Player has an integrated rechargeable Li-Ion battery. It comes fully charged from factory, but it
is recommended to perform a full recharge before the first use.
Recharge the battery connecting the player to a computer using the included USB 2.0 cable (using any USB type mini-B
with 5 pins will also work).
Optionally, you can recharge the battery with an AC/DC power adaptor with a USB type mini-B with 5 pins cable. (Note: We
recommend that the output of the AC/DC does not exceed 1000mA).
Charging time is between 3 and 5 hours, depending if the player is powered off or working. To keep the battery in good
conditions, we recommend charging it while powered off and not leaving it charging for more than 8 hours.
Your Energy™ 3D HD Media Player uses several methods for battery saving: it will power off the display after a few
seconds of inactivity, and it will power off completely after a few minutes of inactivity. All these systems are configurable
respectively browsing the menus SETTINGS -> Power -> Backlight off and SETTINGS -> Power -> Power off. In order to
maximize the battery's lifespan, it is recommended to not disable completely these power saving features. You can also
change 2D and 3D mode backlight values browsing the menus SETTINGS -> Power -> Backlight 2D and 3D.
37