Connection Procedure - Sony DXC-LS1P Instructions D'utilisation

Connection Procedure

1
Connect a camera cable (not supplied) to the camera
control unit.
Align here.
Insert deeply and tighten the screw.
2
Align the positioning pin on the lens with the matching
hole in the camera cable and connect the camera cable
to the camera head unit.
Align here.
3
Attach the ultra mount lens (VCL-04UVM, not
supplied) by turning slowly until the end of the lens hits
lightly the top of the camera head unit.
4
Connect a camera adaptor CMA-D2CE and a monitor to
the camera control unit.
5
Connect an AC power adaptor.
When connection is completed
Turn on the monitor first, and last the camera control unit.
Note
When handling the lens, make sure to keep the lens free of
dust and fingerprints.
15