Candy CDPE 6320 Mode D'emploi page 36

PROGRAMME SELECTION
AND SPECIAL FUNCTIONS
(Use in conjunction with programme guide)
IMPORTANT
The dishwasher has two very practical
functions:
- the "recommended" programme
(which is set in the factory and is
ideal for full-load daily use) for quick
and accurate selection;
- the memory function which saves
the last programme used, so that if
you regularly use the same washing
cycle, you do not have to re-set the
programme every time, thereby
saving time and effort.
"EXPRESS" button
This button allows you to reduce the wash
intensity, decreasing the duration and energy
consumption of the washing cycle.
This button can be used in conjunction with
the 4 basic programmes, creating 8 different
wash cycles.
IMPORTANT
Once selected, this button remains
active (with
indicator light on) for successive
wash programmes, unless it is
pressed again
indicator light goes off) or the cycle
in process is cancelled.
Programme settings
Open the door and place the dirty dishes
inside the appliance.
Press the "ON/OFF" button
The indicator light for the "recommended"
programme or the indicator light for the
last programme used will flash.
To set another programme, press the
"PROGRAMME SELECTION" button.
the corresponding
(corresponding
.
If you wish, press the "EXPRESS"
button.
Press the "START" button (the selected
programme indicator light will stop
flashing and remain on.
When the door is shut, after an audible
signal has sounded, the programme will
start automatically.
WITHIN one minute of the programme
commencing, another programme
can be selected, simply by pressing
the "PROGRAMME
button (it is also possible to select or
deselect the "EXPRESS" button).
Programme interruption
Opening the door when a programme is
running is not recommended especially
during the main wash and final hot rinse
phases. However, if the door is opened
while a programme is running (for example,
to add dishes) the machine stops
automatically.
Close the door, without pressing any
buttons. The cycle will start from where it
left off.
IMPORTANT
A running program can be interrupted
without opening
pressing the "ON/OFF" button. In
this case, simply press the "ON/OFF"
button again to restart the cycle from
where it left off.
WARNING!
If you open the door during the
drying cycle, an audible audio signal
advises you that the drying cycle has
not yet finished.
36
SELECTION"
the door by