Troubleshooting - Summit ACCUCOLD ACF48W Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

You can solve many common problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem before
calling a service technician.
PROBLEM
The unit does not operate.
The unit is not cold enough.
Compressor turns on and off
frequently.
Vibrations
The unit seems to make too much
noise.
The door will not close properly.
If you've checked the table above and find that you still need help with your
appliance, call our Customer Service facility at 800-932-4267 between 9:00AM
and 5:00PM ET. We will do our best to answer your questions.

TROUBLESHOOTING

Troubleshooting Guide
Not plugged in.
Tripped circuit breaker or blown fuse.
Check the temperature set point.
External environment may require a lower
setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
The ambient temperature is warmer than
normal.
A large amount of contents has been
added.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
Check to assure that the appliance is level.
A rattling noise may come from the flow of
the refrigerant, which is normal.
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in
your unit.
Contraction and expansion of the inside
walls may cause popping and crackling
noises.
The appliance is not level.
The appliance is not level.
The door was reversed and not properly re-
installed.
The gasket is dirty.
The shelves are out of position.
10
POSSIBLE CAUSE

Publicité

Chapitres

Table des Matières
loading

Table des Matières