Publicité
Les langues disponibles
Les langues disponibles
2.7
Setting the desk to stop at a desired lowest or highest position
To program the desk to stop at the highest position
1.
To save the upper boundary position, press the "up" button.
2.
Confirm by pressing the "logo" button again
To program the desk to stop in the lowest position, press the "down" button and proceed
accordingly.
To exit the menu without making a selection, wait for about 10 seconds until the height value is
shown on the display again.
To cancel the the highest position stop setting
1.
Press and hold the "logo" button for approx. 5 seconds.
2.
Use the "down" or "up" buttons to select option
14 EN
from the menu.
Publicité
