Error Message; Changing The Batteries - Grasslin talento taxxi plus Mode D'emploi

Error message

When working with the handheld programming device, it can happen that en error message appears in
the display�
• Er 2 = Time switch not recognised (name of the application is not correct)
• Er 1 = Data not correctly transferred� Repeat the transfer�
• Er 0 = Batteries not supplying sufficient voltage

Changing the batteries

1� Undo the screws
2� Replace the batteries
3� 2 x type LR 6 alkaline AA (1�5 volt)
4� Close the handheld programming device
again
20