the appliance when the installation has been completed.
•
Place the appliance on a dry steady flat surface such as a counter
or table. Keep it away from the edge of the work surface.
•
Do not place the appliance near a heat source - Risk of fire.
•
Do not install the appliance with restricted ventilation.
•
Do not keep flammable materials such as alcohol, petrol or
aerosols nearby the appliance - Risk of explosion or fire.
ELECTRICAL WARNINGS
•
Ensure that the appliance is connected to an electrical source
having values within those specified on appliance rating label.
•
It must be possible to disconnect the appliance from the power
supply by unplugging it if plug is accessible, or by a multi-pole switch
installed upstream of the socket in accordance with the wiring rules
and the appliance must be earthed in conformity with national
electrical safety standards.
•
Do not use extension leads, multiple sockets or adapters. The
electrical components must not be accessible to the user after
installation. Do not use the appliance when you are wet or barefoot.
Do not operate this appliance if it has a damaged power cable or plug,
if it is not working properly, or if it has been damaged or dropped.
•
If the supply cord is damaged, it must be replaced with an identical
one by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard - risk of electrical shock.
•
Do not let the cord hang over the edge of table or counter or let it
touch hot surfaces.
•
Before disconnecting the appliance, let it cool down.
•
Do not pull the appliance by power supply cable
•
Take care to avoid any spillage on the electrical connections.
PERMITTED USE
•
WARNING: the appliance is not intended to be operated by means
of an external switching device, such as a timer, or separate remote
controlled system.
•
This appliance is intended to be used in household and similar
it en
11