Metabo HPT UB 18DC Instructions De Sécurité Et Mode D'emploi page 14

English
HOW TO USE
1. About remaining battery indicator
When the light turns on, the remaining
battery indicator lamp turns on and shows the
remaining battery. When the remaining battery
becomes low, the light briefl y blinks about once
every 3 minutes. (Fig. 8)
State of lamp Battery Remaining Power
As the remaining battery indicator shows somewhat
diff erently depending on ambient temperature and
battery characteristics, read it as a reference.
Remaining battery
indicator lamp
NOTE
○ When using a Multi-volt battery, please refer to
the indicator lamp on the battery for the battery
remaining power.
○ Do not give a strong shock to the switch panel
or break it. It may lead to a trouble.
14
Table 5
Over 80%
60%–80%
40%–60%
20%–40%
Less than 20%
Press the switch
to turn on the
LED light
Fig. 8
2. Turning the light on
Press the switch to turn the light on.
Use the adjustment dial that surrounds the
switch to adjust the brightness.
When the brightness reaches the maximum
(4,000 lm) or the minimum (700 lm), the light
briefl y blinks twice. (Fig. 9)
Turn the adjustment
dial to adjust the
brightness
3. Changing the angle of the light
The vertical angle can be changed 138°
(120° upward and 18° downward). (Fig. 10)
Press the switch to
turn on the LED light
Fig. 9
138° vertically
Fig. 10