Notes On Safety; Symbols In The Manual; Symbols On The Equipment; General Notes On Safety - Grizzly GP 2832 K Traduction De La Notice D'utilisation Originale

Notes on Safety

This section deals with the general safety
regulations for working with the equipment.

Symbols in the manual

Warning symbols with informa-
tion on damage and injury pre-
vention.
Instruction symbols (the instruction
is explained at the place of the ex-
clamation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.

Symbols on the equipment

Attention! Do not use for water with
a high sand content!
Read and follow the operating in-
structions provided for the device!
Attention: Remove the plug from
the socket as soon as the power
lead is damaged or cut.
Information of the acoustic power
L
WA
85
level LWA in dB
dB
Electric appliances should not be
disposed of in the domestic gar-
bage.

General notes on safety

Working with the equipment:
Caution: to avoid accidents and in-
juries:
• Keep the equipment away from chil-
dren and pets.
• People who are unfamiliar with the op-
erating instructions are not permitted to
use the equipment. Local regulations
or bylaws may determine the minimum
age for using the device.
• Should there be people in the water,
do not operate the equipment.
• Take appropriate measures to keep
children away from the equipment
whilst it is running.
• Do not use the equipment in the vicin-
ity of flammable liquids or gases. Non-
observance will result in a risk of fire or
explosion.
• Do not use for water with abrasive par-
ticles such as sand. Do not use for wa-
ter containing abrasive particles such
as sand. The dispensing of aggressive,
abrasive (grinding effect), corrosive,
combustible (e.g. motor fuels) or explo-
sive liquids, salt water, cleaning agents
and foodstuffs is not permitted. Liquid
temperature not to exceed 35°C.
• Store the equipment in a dry place and
out of reach of children.
Caution! To avoid damage to the
equipment and any possible person
injury resulting from this:
• Do not work with damaged or incom-
plete equipment, or with equipment
that has been converted without the
approval of the manufacturer. Before
initial operation, have a specialist
check that the required electrical pro-
GB
15