Télécharger Imprimer la page

Black & Decker WDA315J Mode D'emploi page 6

Masquer les pouces Voir aussi pour WDA315J:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Use
Switching on and off (Fig. A)
Fitting the removable squeegee (Fig. B)
Fitting the wall bracket (Fig. C)
Charging (Fig. D, E)
ENGLISH
turn on the unit.
Insert the removable squeegee into the front of the
appliance. Make sure that the accessory is pushed fully in
Fit the wall bracket (4) to a suitable wall (preferably near a
power outlet) using the screws provided.
The unit can then be stored, when not in use, or during the
charging procedure, utilising the hanging attachment (6).
Place the charger (5) into the charging port (9) on the
Place the charging plug into a power outlet and switch on
Press the dust chamber release button (2) as shown in
Seperate the dust chamber (3) from the motor unit as
Lift the pre filter assembly (8) out of the dust chamber (3).
Empty the dust bowl (3) by lightly shaking over a suitable
Rinse out the dust-bowl with warm soapy water.
J.
Replace the dust chamber onto the motor unit. Make sure
the release button (2) clicks into place.
Warning! Before performing any maintenance or cleaning on
the appliance, unplug the appliance.
From time to time wipe the appliance with a damp cloth.
Do not use any abrasive or solvent-based cleaner. Do not
immerse the appliance in water.
6
Push the On/off power switch (1) to the forward position to
u
Returning the On/off power (1) switch will turn the unit off.
u
u
as shown figure B.
u
u
u
handle of the unit as shown in figure D.
u
as shown in figure E. The charger LED (9) will light.
Cleaning the filters (Fig. F, G, H, I, J)
u
figure F.
u
shown in figure G.
u
Remove the wet/dry foam filter (10) from the filter assem-
bly as shown in figure H.
u
container as shown in figure I.
u
Wash the filter with warm soapy water as shown in figure
u
Allow the filter to dry naturally, using heat may cause the
u
filters to distort.
Refit the filter (10) into dust chamber (3).
u
u
(Original instructions)
Maintenance
Protecting the environment
Guarantee
Technical Data
Your BLACK+DECKER cordless appliance has been designed
to operate over a long period of time with a minimum of main-
tenance. Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless
appliances:
Run the battery down completely if it is integral and then
switch off.
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
your BLACK+DECKER dealer (cat. noVPF20)
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
WDA315J H1
Voltage
Current
Watt Hours
Weight
offers consumers a 24 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights.
The guarantee is valid within the territories of the Member
States of the European Union and the European Free Trade
Area.
u
u
Z
Regularly clean the ventilation slots in your appliance/
u
u
Replacing the filters
The filters should be replaced every 6 to 9 months and when-
ever worn or damaged. Replacement filters are available from
Remove the old filters as described above.
u
Fit the new filters as described above.
u
Black & Decker is confident of the quality of its products and
WDA320J H1
10.8V
10.8V
1.5Ah
2.0Ah
16.2Wh
21.6Wh
0.9Kg
0.9Kg

Publicité

loading

Ce manuel est également adapté pour:

Wda320j