nedis WIFICI30CGY Guide De Démarrage Rapide page 5

Max. radio transmit power
Pan (horizontal)
Tilt (vertical)
Antenna gain
Frequency range
Main parts (image A)
Status indicator LED
1
Camera lens
2
Microphone
3
SD card slot
4
Reset button
5
Speaker
6
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in this document
before you install or use the product. Keep this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a damaged
or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance to
reduce the risk of electric shock.
• Unplug the product from the power source and other equipment if problems
occur.
• Do not expose the product to water or moisture.
• Do not unplug the product by pulling on the cable. Always grasp the plug and
pull.
• Consult the local laws and regulations for this product before installing and
using.
Preparing the security camera
Use an SD card with a minimum of 8 GB and a maximum of 128 GB.
4
1. Insert the new SD card into the SD card slot A
2. Connect the USB cable A
18.5 dBm
355 degrees
60 degrees
3 dBi
2412 - 2472 MHz
7
8
9
q
w
e
to the micro USB port A
w
5
Push-to-talk (PTT)
Micro USB port
Reset pin
Mounting bracket
Micro USB cable
USB power adapter
.
4
8 .