Trouble Shooting - Unold Safety Lift 75014 Notice D'utilisation

trouble Shooting

Problem
The iron does not heat
up.
Safety-Lift mode is not
activated.
No steam is generated.
The iron leaks.
A white or brown liquid
is leaking from the
soleplate of the iron.
Please check
Material selector adjusted to
"AUS/OFF"?
Plug properly connected?
Is the automatic shut-off
feature activated?
Is the Safety-Lift selector on
"AUS/OFF"?
Plug properly connected?
Does your hand touch the
handle?
Is the temperature of the iron
high enough?
Is the steam selector
adjusted to ?
Is the steam nozzle clogged?
Is the iron in a horizontal
position with the Safety-Lift
mode deactivated?
Is the temperature of the iron
high enough?
Did you use the steam burst
button too frequently?
Is the water used calcerous?
Solution
Select the desired material.
Connect the plug properly to the
wall socket.
Touch the handle.
Switch the Safety-Lift selector to
"EIN/ON".
Connect the plug properly to the
wall socket.
Take your hand off the handle to
activate the Safety-Lift mode.
The material selector must be
adjusted to wool, cotton or linen in
order to generate steam.
The steam selector must be
adjusted to a steam generating
position.
Turn the steam selector various
times to different positions.
With the Safety-Lift mode
deactivated, the iron always has
to be in an upright position! We
recommend to store the appliance
always in Safety-Lift mode.
The material selector must be
adjusted to wool, cotton or linen in
order to generate steam.
Please wait approx. 3 seconds
between one steam burst and
another.
Use bottled mineral water or mix
your tap water with distilled water to
equal parts.
21