GBC ProClick Pronto P2000 Manuel D'utilisation page 5

4.5 Binding
DISPLAY 1
Insert document into document sizer for the machine to
identify the document size as shown in Display 1.
The machine identifies the document in 3 different
sizes, "Small", "Medium" and "Large".
DISPLAY 2
Once the ProClick ® Pronto
document thickness, the display will indicate the correct
spine size to load into the machine. The example shown in
Display 2 indicates "Small" under "Insert correct
ProClick spine size".
®
The system will allow you to bind small documents with
larger spine sizes.
Insert the appropriate spine cassette into spine slot as
shown in Display 2.
DISPLAY 3
™ ™ ™ ™ ™ has measured the
ACCO Brands Corporation, 300 Tower Parkway, Lincolnshire, IL 60069. www.gbc.com
ProClick Pronto
In order to hide the spine seam of a completed document,
you must place the rear cover face to face on top of the
front cover before you insert the document into the "Bind"
sections as indicated in the above illustration.
Insert punched document into the binding slot (punched
side first)
DISPLAY 4
Press "BIND" to bind your document and remove the
document after you hear a BEEP.
Additional documents can be bound without resizing, if
binding books are of the same document size.
The ProClick ® Pronto
stays idle for 2 minutes. You will need to resize your
document to continue.
4.6 Editing your document
The ProClick ® Pronto ™ ™ ™ ™ ™ has a special spine opener tool where you
can unbind the bound book for editing.
To unbind a bound book, just insert the wedge of the spine opener
tool into the loops of the ProClick
action. This opens the ProClick
and manually resecure the bind spine.
®
™ ™ ™ ™ ™ will time out to the first step if it
spine and pull forward in a sliding
®
® allowing you to edit the documents
™ ™ ™ ™ ™
ENG
5