DURAVIT C14290 010U Notice De Montage Et D'utilisation page 5

# C14290 010U
1
> Cut the plaster shield so that it extends
– ⅛" from the finished surface.
> Remove two screws and remove the cover.
NOTICE
Water damage
> Seal the wall around the plaster shield with
waterproof sealant.
# C15290 012U
2
> Install the stop ring.
> Rotate the cartridge stem fully clockwise.
> Position the stop ring on the stem such that
it rests against the stop post.
2
1
5
MAL_57167/20.10.4