Starting Up - Genius INVICTUS X WATER Mode D'emploi

5 Starting up

Assembly of the cleaning head
20
GB
L
3
4
Emptying/filling the fresh water tank
Instruction Manual
Insert brush roll
Replace brush roll cover
Place the guides on the bottom edge into the appropria-
te recesses on the cleaning head. Then lift the cover up
until you hear it click into place.
Insert the connecting tube onto the top of the main unit
and press until you hear it click into place.
Insert the motorised cleaning head into the bottom end
of the main unit and press until you hear it click into
place.
If necessary, you can detach the motorised cleaning
head from the main unit again by pressing the release
button. Empty both water tanks beforehand to prevent
any liquid from leaking out.
Place the fresh water tank on the front of the main unit
and press until you hear it click into place.
Filling:
Always empty the waste water tank before you fill the
fresh water tank to prevent overfilling.
Pull the release on the main unit to detach the fresh
water tank.
Open the tank closure.
TIP: If necessary, a few drops of detergent can be added
to the fresh water tank. In this case, do not use the
boost mode, in order to prevent foam from being
sucked into the motor.
„
„
„
„
„
„
„
„