Using The Device; After Use - Beem Kingmop-Superclass Mode D'emploi

Using the device

Insert the plug into the mains socket. The power indicator
‹
light (9) lights up.
Set the desired steam flow with the steam flow regulator (2).
‹
Switch on the device or hold down the button, see
‹
elements section.
Put the device onto the carpet coasters (13) when cleaning
‹
carpets.
Slowly push the device over the surface to be cleaned.
‹
NOTE
►

After use

Switch off the device, see
‹
pull the plug out of the mains socket.
Allow the device to cool down completely.
‹
Take the cloth from the foot of the device.
‹
Empty the water tank.
‹
BEEM - Elements of Lifestyle
Vigorous cleaning movements can cause small amounts
of water to enter into the ventilation pipes in the water
tank. Small amounts of water may then drop out of the
ventilation pipes onto the floor.
Operation and use
Operating elements section and
EN
operating
45