Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.
Description
1. DISPLAY & INDICATORS
This displays shows :
The effect number when you turn the jog wheel
-
-
The delay value when you turn the DELAY button
The depth value when you turn the FEEDBACK button
-
-
The first effect of each group of effects when you press the UP or DOWN buttons. ( Ex : effect 1 for Large hall group, effect 17 for large
hall with high frequency filter on decay group, ... )
The RECALL indicator lights on when you are in RECALL mode ( when you want to recall an effect you saved in memory banks )
The STORE indicator lights on when you are in STORE mode ( when you want to save an effect in memory banks )
The EDIT indicator lights on when you press the ENTER button.
2. JOG WHEEL
The jog is used to search the effect number you want. Clockwise, you increase the number. Counter-clockwise, you decrease the number.
In the STORE or RECALL mode, the jog wheel is used to select the memory banks number.
3. DELAY CONTROL
The DELAY button is used to adjust the delay time of the reverb. The adjustment range is 1 to 127.
4. FEEDBACK CONTROL
The DELAY button is used to adjust the depth of the reverb. The adjustment range is 1 to 127.
5. UP BUTTON
This button is used to go to the first effect of each group of effects. ( Ex : effect 1 for Large hall group, effect 17 for large hall with high frequency
filter on decay group, ... )
6. BYPASS BUTTON
When you press this button, the DSP-256 becomes active and it simulates the effect you choose. If you press one more time this button, the DSP-
256 becomes inactive and the output signal will be the same that the input signal.
7. STORE BUTTON
Use this button to save an effect in the memory banks. To save, first press the STORE button then choose the bank number ( 0 to 63 ) using the jog
wheel. To save the effect, press the ENTER button.
8. INPUT LEVEL CONTROL
This control can be used to adjust the input signal to obtain the desired volume.
9. OUTPUT LEVEL CONTROL
This control can be used to adjust the output signal to obtain the desired volume.
ENGLISH
CAUTION
To prevent electric shock do not remove cover (or bottom) screws.
No user serviceable parts inside refer servicing to qualified
servicing personnel.
4
Publicité
