Maschinenfabrik Reinhausen VACUTAP VV Instructions De Service page 80

21 Take-off terminal
If necessary
compensate with
washers
!
These take-off terminals (with or without take-off leads) are to be fitted with screening caps
(included in MR's delivery) by the transformer manufacturer.
22 Fine tap selector terminal
If necessary
compensate with
washers
!
These terminals are to be fitted with screening caps (included in MR's delivery) by the
transformer manufacturer.
M = Drive side
!
The connecting diagram is binding for the designation of the terminals and phases
dftr. Str 21.01.09
chkd
Take-off terminal
(optional) not possible
with potential connection
M
Take-off
terminal
(optional)
Take-off terminal (standard)
M
On-Load Tap-Changer VACUTAP ® V V
Position of the connecting terminals
2
1
899051 7E
3
DIN A2