Teesa TSA3546 Manuel D'utilisation page 24

24
IMPORTANT:
• the lid can be removed from the jar only AFTER the jar has been removed from the motor
unit!
• Notice: in case of automatic turn off, please rotate the knob to OFF, disconnect from power
supply and let the device cool down completely before reusing!
• Do not run the blender for longer than necessary. Do not over blend ingredients.
• Use the pulse function when the ingredients are too thick or coarse to circulate within the
blender jar.
EN
• Do not exceed the maximum capacity of the blender.
• The level indication scale is usually a good indicator to prevent over loading, however
some especially dense combinations of ingredients may still strain the motor. If the
motor seems to be straining or running slowly, only operate for 10 seconds at a time, or
reduce the amount of ingredients used. Adding more liquid can also help to loosen dense
mixtures.
• The maximum amount of ice cubes the blender can process is 200 g. Do not process big
ice cubes above given maximum ingredients size, use ice cubes from standard ice tray!
• Do not blend heavy mixture for more than 10 seconds. For normal blending tasks, it is
suggested not to blend longer than 1 minute at a time. If you need to blend longer, turn
off the blender and stir ingredients before starting again. Machine running time cannot
be more than 2 minutes. After the shutdown, it is necessary to let it fully cool to room
temperature.
• Do not operate the device with no load or when overloaded! Do not operate the device
for longer than allowed work time. This device is equipped with a safety features which
protects against excessive overheat and current overload. In case of overloading with
products or overheat, the blender automatically activates the protection and operation
will stop. If this occurs, set the rotary knob to OFF, unplug the appliance and allow it to
cool down for 30 minutes. Remove or reduce the ingredients and clear up the blender jar
before restarting operation.
• The blender is not suitable for kneading dough nor mashing potatoes.
• To add liquid ingredients during blending, pour them into the blender jar through the
hole by removing the measuring cup.
4. When processing is completed, set the knob to OFF
position and disconnect from power mains. Rotate the jar
anticlockwise and remove it from the motor unit.
TIPS AND NOTES ON FOOD PROCESSING
Owner's manual