Attaching Handle - Panasonic MC-UG693 Manuel D'utilisation

Handle
Screw Hole
Orifice de la
vis du manche
Orificio del tornillo
en el mango

Attaching Handle

Screw
Vis
Tornillo
Handle
Manche
Mango
Screw
Vis
Tornillo
- 14 -
➢ ➢ Remove the screw located just below
the top edge of the back of the
vacuum cleaner.
➢ ➢ Position the handle as shown in the
illustration.
➢ ➢ Slide the handle into the opening at
the top of the vacuum cleaner.
➢ ➢ Insert the screw so it passes through
the handle into the vacuum cleaner.
➢ ➢ Begin to tighten the screw with your
fingers. It may be necessary to adjust
the handle slightly.
➢ ➢ Using a screwdriver, tighten the
screw.
CAUTION
Do not overtighten.
Overtightening could strip the screw
holes.
Do not operate the vacuum cleaner
without the screw in place.