HAEGER KS-DIG.008A Mode D'emploi page 5

Selecting weight unit (g/oz/lb: oz/water-ml/milk-ml)
Turn the scale on by rotating the power button. Before the display switch off, press
the unit key to choose the unit. The key is on the back of the scale.
Note: Set the unit before weighing. It could not change the unit while weighing.
Tare Function
1. Put the container on the platform, the LCD display will show the weight of the
container.
2. Press "TARE" to clear the weight of the container (reset to zero). Then put the
food into the container, the LCD display will show the weight of food only.
Repeatedly press "TARE" to weight more different foods.
3. The LCD display will show the negative value of container if you remove the
food and container from the platform together. Please press "TARE" again, the
display will show zero in 2 seconds.
Error Indication
Low power indication
Instructions for use
Over-load Indication
When the scale is over-loaded (more than 5kg), the screen will
appear "EEEE".
When the screen indicates
few seconds. Please rotate the button not less than 120 degrees
again.
, it will turn off automatically after
English
3