Publicité
Les langues disponibles
Les langues disponibles
Safety instructions
• The helmet must fit securely and the chin strap must be firmly
closed.
• Do not tip the helmet back as this will leave your forehead
unprotected. The straps must be positioned over the jaw bones
(Fig. B).
• Do not wear any head covering under the helmet.
• Ensure that the airflow inside the helmet is not restricted.
• Do not make any changes to the helmet, its structure or the
individual components.
• Do not paint the helmet or put stickers or labels on it.
• The helmet is intended to protect your head in the event of an
impact. After just one (even light) impact this protection is no longer
guaranteed. Discontinue using the helmet after an impact or colli-
sion, rendered unusable and disposed of, even if there is no visible
damage.
• Do not use petroleum-containing solvents or detergents to clean
either the interior or exterior of your helmet. Use pH-neutral soap
diluted in clean water, and rub it into the helmet carefully using
a soft cloth. Wipe dry with a fluff-free cloth. The ear cushions can
be cleaned with a little soap and a soft brush. The visor should be
cleaned with soap and water only, and left to air-dry.
Do not expose the visor to sources of heat!
GB
39
Publicité
