Flotec FPPC-5800 Notice D'utilisation page 6

Installation
Step 10: Connect Hose to Cleaner.
Connect the hose cuff of the 20' hose to the swivel
assembly in cleaner (correct end of hose is marked).
Fill the cleaner with water and let it sink to the bottom.
Verify hose connections as shown on the following page,
and that gate valves are fully open in the suction line.
Figure 11
Follow drawing that most closely resembles your skimmer installation.
Water
A
Level
Vacuum
Regulator
Reducer
Cone
Skimmer
Port
Gate valve for
skimmer must
be fully open
For parts or assistance, call Flotec Customer Service at
Hose Cuff
marked
"Connect
to Cleaner"
1875 0795
Hose Connections
Figure 12
Vacuum
B
Regulator
with Cap
Reducer
Cone
Skimmer
Gate valve for
vacuum port must
be fully open
1-800-365-6832
6
Water
Level