Lighting; Pneumatic Connection - HUBER INSTRUMENTE HM35 Mode D'emploi

•
After switch-on, the HM35 switches to the last operational mode used, e.g.:
•
With the display filter activated, wait until the transient effect finishes (approx. 5 s).
3.2

Lighting

Press the On/Off-key
Switching on
In the Menu, select the Configuration → Lighting function and
Brightness control
select an adjustment of Off, Level 1, Level 2 or Level 3.
The Ex-version HM35 only has the levels Off and Level 1.
Briefly press the On/Off key
Switching off
(switch off the instrument),
or automatic switch-off after 20 s.
With mains operation, the HM35 must be switched off manually.
3.3

Pneumatic connection

Designation
Hose 4/6 mm
NPT1/8" internal
Plug in nipple „Rectus" Type 20
M10 x 1 internal thread (for „Minimess" connector)
Ensure that the pneumatic hoses are connected correctly!
Higher pressure
+P
Lower pressure (not available with the absolute and relative pressure version)
T-
( )
for > 1 s
( )
(< 1 s)
Pressure range
≤ 7,5 bar
10 ... 90 bar
≤ 30 bar
all
38