BluMill Active R100 Mode D'emploi page 10

USER INSTRUCTIONS
EN
DISPLAY OPERATING INSTRUCTIONS
Display & Button Defi nition:
Window 1: Displays time, number of strokes and distance.
TIME = Duration of exercise. When "TIME" indicator is lit, Window l shows the current number of
strokes. When the "DISTANCE" indicator is lit: Window 1 shows the distance rowed in meters.
Window 2: Displays number of strokes per minute and estimated time required to row 500 meters.
When the "COUNT/min" indicator is lit: Window 2 shows the number of strokes per minute. When the
"Sec/500 meter" indicator is lit: Window 2 shows the estimated time required to row 500 meters.
Window 3: Always displays resistance.
Note: The display in Normal Mode will change every 5 seconds. The display in
Hold Mode does not change.
BUTTON DESCRIPTION
Start/Stop: When stopped, the display data clears Pause/Resume: When resumed, the display data
appears Resistance Reduction
Resistance Plus
Resistance Reduction + Resistance Plus at the same time: Switches between
Normal Mode and Hold Mode
DAILY MAINTENANCE
Rowing machine maintenance:
Proper maintenance is the only way to keep your rowing machine in top functional condition. Impro-
per or negligent maintenance can damage or shorten the life of the rowing machine.
Important Reminder:
Do not use a rag or solvent to clean the rowing machine. The controller of the rowing machine should
not be exposed to direct sunlight hit or moisture to avoid damage.
Always check and lock all parts of the rowing machine, replace defective parts immediately, and/or
leave the equipment idle for repair.
Clean Up
Frequently clean to ensure the life of the rowing machine.
Warning: When cleaning the rowing machine, turn the power off unplug the power cord from the
outlet.
10
2021-07-22 OCG BluMill Rowing Machine ManualV02.indd 10 2021-07-22 OCG BluMill Rowing Machine ManualV02.indd 10
DISTANCE (meters) COUNT COUNT/MIN
SEC/500 METERS
TIME RESISTANCE
Start/Stop Pause/Resume Resistance Down Resistance Up
29-07-2021 08:32 29-07-2021 08:32