Power Switch; Steam Boost Button; Steam Level Control Button; Steam Shot - Rotel U947CH1 Mode D'emploi

Power switch

o
Press the power switch to start the appliance. The power indicator light will turn on,
and the indicator light of the low steam level (default setting) will flash.
o
Press the power switch for two seconds to disconnect the appliance from the power
supply.
Refill indicator light
o
If the water level in the tank gets too low while steam ironing, the refill indicator light
will illuminate.

Steam boost button

o
During ironing, firmly press and hold the steam boost button to
release a strong, continuous flow of steam, delivered through
the soleplate (Fig.2).

Steam level control button

o
Select the required steam level between low (standard), medium or high by pressing
the steam level control button. The corresponding indicator light flashes until the se-
lected steam level has been reached, then remains lit.

Steam shot

o
Press the steam boost button twice within one second to activate the steam shot
function, and remove effortlessly even the toughest creases.

Temperature dial

o
Turn the dial to set the required ironing temperature, based on the garment to be
ironed.
o
The temperature indicator light is on while the appliance is heating up. Once the se-
lected temperature has been reached, it will switch off. This indicator light goes on
and off during ironing, showing that the appliance periodically heats up to maintain
the selected temperature.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instructions for use
53