Table des Matières
Publicité
figure 4
M4x25 mm screw
Route the cables
Warning! Allowing any part of your computer cables to get caught between
moveable parts might result in personal injury or damage to your equipment.
Make sure that you leave enough cable slack at the arm joints so that the arm can
be fully extended.
1. Remove the cable covers from the spring arm (1).
2. Run the cables down the spring arms, leaving enough slack at the arm joints.
3. While holding the cables against the spring arms, press the cable covers back onto
the spring arm. (figure 5)
figure 5
Instruction manual
VESA mount
Spring arm
Spacer
8
Monitor
Publicité
Table des Matières
