Cleaning And Maintenance; Guarantee Terms - Bestron AST2200 Mode D'emploi

user's instructions
• The prescribed temperature settings are applicable solely to the specified fabrics. Fabrics with a glossy
or raised surface should be ironed at a lower temperature.
• Sort the fabrics by ironing temperature, i.e. wool with wool, cotton with cotton, etc.
• Begin by ironing the garments that need to be ironed at a lower temperature before moving on to the
garments that need to be ironed at a higher temperature. This is advisable because the iron heats up
faster than it cools down.
• Iron garments containing a mixture of fabrics, for example 60% polyester and 40% cotton, at the lowest
temperature – in this example, the ironing temperature for polyester.
• When ironing garments made from an unknown fabric always begin at a lower temperature. Test the
iron on a concealed area, for example an area on the inside of the garment.
• Pure woollen fabrics (100% wool) can be pressed using steam. Preference is given to the use of a dry
cloth between the iron and the wool. It is best to press wool on the inner surface of the fabric.
• Always iron velvety fabrics and other fabrics that readily become shiny in one direction; apply gentle
pressure to the iron.

cleAnInG AnD MAIntenAnce

1. Turn the steam-control dial to the
2. Turn the temperature-control dial to the MIN position.
3. Remove the plug from the wall socket.
4. Stand the iron upright, and allow it to cool down completely.
5. Empty any water that may still be in the water reservoir by holding the iron upside down above a sink.
6. Clean the soleplate with a cloth moistened with vinegar.
7. Store the iron.
• Never use metal implements or scourers to clean the soleplate; otherwise the soleplate could be
damaged.
• Never immerse the appliance, plug or power cord in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance

GuArAntee terMs

The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. N o charges will be made for labour costs or materials during the warranty period. Any repairs carried
out during the warranty period do not extend the warranty period.
2. T he importer automatically becomes the owner of any faulty parts that he replaces or a faulty appliance
(in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. C laims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
Do not iron.
Synthetic Acryl
Polypropylene
Polyurethane
Nylon
Synthetic Acetate
Synthetic Polyester
Viscose
Silk Silk
Wool Wool
Cotton Cotton
Linen Linen
position.
21
steam or dry
steam or dry