INFOSEC CS141-MINI Guide D'installation Rapide page 13

5. CS141 options
The CS141 board can be supplemented with a
variety of environmental sensors and other
devices to monitor temperature, humidity, fire
and smoke, motion and intrusion, pressure, fill
level and so on.
6. Sending shutdown signals to computers on the network
For shutting down a computer in case of a power
failure it is necessary to install an RCCMD client on
it. Some configurations into the event management
of the adapter have to be done, too.
Installation of the RCCMD client
1.
Download the
Management CD or from the internet.
https://www.infosec-ups.com/fr/accessoires-et-
logiciels/logiciel-client-rccmd.html.
2.
Each RCCMD installation requires a separate
license key. For some products, a license key is
included. More licenses are available at your supplier.
setup file from the UPS-
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany
All rights reserved - v.: 3.1.0 2019-08-14 /CS141 - FW1.74-1.80
INFOSEC UPS SYSTEM – 15, rue du Moulin – 44880 SAUTRON - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 12 19 AA AA 203 06
Moreover, other components such as mounting
brackets, BACnet converter or PROFIBUS etc. are
available. Ask your UPS manufacturer / supplier for more
detailed information about the available options.
3.
In the first menu, you have to enter the IP address
of the adapter whose shutdown signals should
receive. Commit the following default configuration.
Note the shutdown file in the last window. For editing
the shutdown sequence of the client, press the
button "configure" (It is also possible to edit the batch
file to change or add events.) the installation
finishes by pressing "install" and the service will start.
13