Basic Configuration; System - Date & Time - INFOSEC CS141-MINI Guide D'installation Rapide

3. Configure the IP address of the CS141 card
1.
Go to:
System
-
Network
-
in the menu on the left.
2.
Enter the values for your network:
IP adress
-
Subnet mask
-
Default Gateway
-
DNS server (optional)
-
3.
Press the '' Apply
changes.
➔ Once the configuration is applied, the card directly takes
the IP address that has been configured. Thus, the web
interface is no longer accessible with the IP address
10.10.10.10 but with the new IP address configured.

Basic configuration

4.
4.1 NTP
1.
Go to:
System
-
Date & Time
-
in the drop-down menu.
2.
Enter the IP Address
synchronize the CS141 with this server.
The timeserver settings are important for the event- /
alarm logging. (If no timeserver is configured the time
will be set to 01.01.2000 00:00).
3.
The changes of each configuration page have to
commit by pressing the button
'' button to validate the
of your timeserver and
"Apply".
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany
All rights reserved - v.: 3.1.0 2019-08-14 /CS141 - FW1.74-1.80
INFOSEC UPS SYSTEM – 15, rue du Moulin – 44880 SAUTRON - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 12 19 AA AA 203 06
English
10