INFOSEC CS141-MINI Guide D'installation Rapide page 12

4.4 Event configuration for the CS141
1.
Go to
Devices
-
UPS
-
Events
-
from the drop-down menu.
Click the Button "+" next to the event "Powerfail".
2.
3.
The Job-Editor starts. Choose the option
Shutdown" from the menu.
4.
Enter the IP Address
is usually 6003). At the right side you can specify when the
shutdown signal is going to be released, for example "At
300 seconds remaining time".
5. Click the button "Save
6.
For security reasons, we recommend that you also
configure the immediate sending of a "shutdown" signal to
the "low battery" event.
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 12 19 AA AA 203 06
of your client (The Liste- ner Port
Configuration".
All rights reserved - v.: 3.1.0 2019-08-14 /CS141 - FW1.74-1.80
INFOSEC UPS SYSTEM – 15, rue du Moulin – 44880 SAUTRON - FRANCE - www.infosec-ups.com
"RCCMD
English
12