Menu System; Touch Sensor Tone; Manual Clock Adjustment; Synchronize Clock - Kenwood KDC-M4524 Mode D'emploi

Menu system

Menu System
Setting during operation beep sound etc. functions.
The Menu system basic operation method is explained here. The
reference for the Menu items and their setting content is after
this operation explanation.
1
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2
Select the menu item
Press the [FM] or [AM] button.
Example: When you want to set the beep sound select the
"Beep" display.
3
Set the menu item
Press the [4] or [¢] button.
Example: When "Beep" is selected, each time the button is
pressed it switches "Beep ON" or "Beep OFF". Select 1
of them as the setting.
You can continue by returning to step 2 and setting other items.
4
Exit Menu mode
Press the [MENU] button.
When other items that are applicable to the basic operation method
above are displayed afterwards their setting content chart is
entered. (Normally the uppermost setting in the chart is the original
setting.)
Also, the explanation for items that aren't applicable (<Manual Clock
Adjustment>etc.) are entered step by step.

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.
Display
"Beep ON"
"Beep OFF"

Manual Clock Adjustment

This adjustment can be done when the <Synchronize Clock> (page
22) is set as OFF.
1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust" display.
2
Enter Clock Adjust mode
Press the [4] or [¢] button for at least 1 second.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit Clock adjustment mode
Press the [MENU] button.

Synchronize Clock

Synchronizing the RDS station time data and this unit's clock.
Display
"SYNC ON"
"SYNC OFF"
It takes 3 to 4 minutes to synchronize the clock.
— 22 —
Setting
Beep is heard.
Beep canceled.
Setting
Synchronizes the time.
Adjust the time manually.