Wolf KG Top 530 Notice De Montage page 19

Step 1
Notch
11
11a
12
10a
3065279_201804
Installation instructions
Place segment No. 5 on to the lifting equipment. Lift it to the installation
height and slide it onto rotor segment No. 4.
Place the segment onto the lifting equipment so the strut with the cen-
Please
tre notch is facing downwards. This allows the centre bolt of segment
note
No. 4 to slot into the notch.
Upper strut
10
12
11
12
10a
12
No.
5
No.
4
Slide the segment all the way into its end position.
- Fit 2 fitting bolts M8x30 (item 11) and 2 bolts M8x25 (item 10) with
nut M8 and washers (item 12) to the lower strut.
- In the upper strut, temporarily insert 2 fitting bolts M8x30 (item 11a)
for adjusting the position.
- Secure the upper strut in the centre, using 1 bolt M8x25 (item 10a)
and nut with washers (item 12).
- Fit 2 bolts M6x12 with washer (item 15) and nut M6 (item 16) – con-
nection on the outer perimeter
After adjusting and retightening the segment, remove the 2 provisio-
nally inserted fitting bolts M8x30 (item 11a). These are only perma-
nently fitted with the next segment.
15
16
19