Using the Drive
Inserting/Removing the Drive
For details on how to insert and remove the drive, refer to "Multimedia Pocket" in the
Reference Manual included with your computer.
Setting a Disc
1
Turn on the computer.
2
Slide the latch (A) and open the cover.
3
Press the eject button (B) and slowly
E
pull out the tray.
4
Insert/Remove the disc.
To insert
Set the disc with the label side up and press the
center of the disc until it clicks in place.
To remove
Press on the center spindle (C) and carefully lift up
the edge of the disc.
5
Close the tray and the cover.
Do not press the eject button.
NOTE
To remove a disc when the computer is powered off, insert a pointed object (e.g.,
the bent-out tip of a paper clip) into the emergency hole (D). Pushing it to the end
allows the tray to come out.
If the vibration of the drive is excessive, check the disc.
For AutoPlay CD/DVD:
• If an AutoPlay CD/DVD does not start after the computer resumes from sleep
(
Windows 7
the drive and then reinsert it after waiting 15 seconds.
• An AutoPlay CD/DVD may start during fi le access depending on the status of the
disc.
When playing back video from a disc, playback may not be smooth in some conditions.
8
), standby (
Windows XP
) or hibernation, remove the disc from