Publicité
Les langues disponibles
Les langues disponibles
We would like to congratulate you on
the purchase of the recharging base
for the portable RF receiver and hope
it will serve you for a long time to
come.
Please read through these operating
instructions carefully. They tell you
how to set up the system correctly
and explain all the system's features
to you.
Standard components
Please check if all following compo-
nents are included:
- Recharging base with bridge
element and 4 safety screws
- 2 x NiMH rechargeable batteries
(Type AAA)
- Power supply unit
- Operating instructions
- Guarantee card
If any parts are missing, please
immediately contact your dealer or
the manufacturer directly.
How to Start
1. Please first remove the batteries
from the RF receiver and replace
them with the rechargeable bat-
teries included with the base.
2. Connect the recharging base with
the power supply by inserting the
round plug into the DC jack on the
back of the recharging base .
3. Plug the power cord into a 230-
volt power outlet.
Rechargeable Batteries
The recharging base comes with 2
NiMH rechargeable batteries. If the
rechargeable batteries are properly
charged and discharged, they will
have a long service life.
Please make sure that the batteries
are inserted correctly in the battery
compartment of the portable RF
receiver. The illustration on the bottom
of the battery compartment indicates
the correct direction.
Please note that the rechargeable
batteries are not charged on delivery
and must be completely charged (at
least 10 hours) in the portable RF
receiver in the recharging base first.
To recharge your portable RF recei-
ver, please use only the rechargea-
ble batteries included with the
recharging base or the rechargea-
ble batteries that are available as
special accessories (A-2994-0).
English 7
Publicité
