Clock Setting; Timer Setting - TechLine MI-563C Manuel D'instructions

CLOCK SETTING

Function switch on STANDBY position
1. Press & hold MEMORY / C-ADJ. button until the time will display 12-hour digit flashing.
2. Press TUNING / SKIP / SEARCH (DOWN or UP) button to adjust 12-hour or 24-hour digit.
3. Press MEMORY / C-ADJ. button again , the time display HOUR digit flashing , press
TUNING / SKIP / SEARCH (DOWN or UP) button to adjust HOUR digit; Press MEMORY/
C-ADJ button once more, the MINUTE digit flashing, adjust it by the SKIP/SEARCH/
TUNING (UP or DOWN)button.
4. Press the MEMORY/C-ADJ button again to confirm the time.
5. Each enable state as shown above will be cleared if the key is not pushed in 10 seconds.

TIMER SETTING

1. After adjusting clock, press the TIMER button for a few seconds, "
appears on the display and the HOUR digit flashing.(F1)
2. Press the TUNING / SKIP / SEARCH (UP or DOWN) Button to adjust it.
3. Press the TIMER button again, the MINUTE digit will start flashing, adjust it by pressing
the TUNING / SKIP / SEARCH (UP or DOWN) button.
4. Press the TIMER button once more to confirm/order TIMER ON time.
5. After adjusting "TIMER ON", "
6. Repeat the above steps 2 to 3, then press the TIMER button once more to confirm/order
TIMER OFF time.
7. Now the "TUNER" or "CD" appears on the display and the flashing , adjust "TUNER" or "CD" by
pressing the TUNING/SKIP/SERCH (UP or DOWN) button.
8. Press the TIMER button again, the timer "VOL" indicator appears on the display and flashing,
adjust the timer volume high or low by the TUNING/SKIP/SEARCH *(UP or DOWN) button.
9. Each enable state as shown above will be cleared if the button is not pushed in 10 seconds.
10. After adjusting "TIMER ON" and "TIMER OFF" ,press the TIMER button, "
the display.
11. The unit will be switched on automatically at "TIMER ON" order and start playing & the unitl will
be switched off automatically at "TIMER OFF" order.
F1
EQ CONTROL (on the remote)
EQ shows the present sound tone.
When you press the EQ button on the remote, the sound tone changes as below:
PASS
OFF" appears on the display and the HOUR digit flashing.(F2)
F2
ROCK
CLASSIC POP
UK-4
ON" and "00:00"
" appears on
JAZZ