Koenic KTO 110 Mode D'emploi page 22

Congratulations!
Thanks for your purchase of KOENIC product.
Please read this manual carefully and keep it
for future reference.
Intended use
This product is suitable for toasting bread
only. The roll attachment is intended only for
crisping up rolls or croissants. Any other use
can lead to damage to the device or injuries.
Content
1 x Toaster
1 x Roll attachment
1 x Instruction manual
Toasting bread
1. Adjust the right length of the power cord
and lead the cord out at the side of the
toaster.
2. Connect the plug to a suitable power outlet.
3. Put one or two slices of bread into the bread
slot.
4. Check whether the crumb tray is properly
inserted.
Caution
Risk of burning hazard when not using
typical bread for toasting. Due to smaller size
or shape there is a risk of touching hot parts
when taking out the toasted bread.
Partlist
Crumb tray (not shown)
1
Stem (not shown)
2
Roll attachment
3
Toasting level setting
4
Powercord with plug (not shown)
5
STOP button
6
Reheat button
7
Defrost button
8
Control lever
9
Bread slot
10
Before first use
Operate the product for few cycles or about 10
minutes without bread in a properly ventilated
room. Please ensure for suffi cient ventilation,
as this may lead to slight smell and smoke, but
this is normal and will disappear after a short
time.
Plug in the product.
Check whether the
crumb tray is inserted
correctly.
EN
Put in the bread.
Set toasting level.
21